3 |
| ||
3 | Power On |
| |
1 | Plug the printer into a grounded electrical outlet. | power button | |
| |||
2 | Press the power button to turn on the printer. |
| |
| Don’t turn on your computer yet. |
| |
Don’t use an outlet controlled by a wall switch or timer. Never use a power strip switch to turn the printer on or off; use only the printer’s 
power button.
44Load Ink
1 Open the output tray and raise the printer cover.
2
1
2 Lift up the ink cartridge clamps.
You must install both cartridges or the printer won’t work.
3 Unpack the ink cartridges that came with your printer and remove the yellow tape.
Don’t remove the seals from the bottom of the cartridges; ink will leak out.
Keep cartridges out of the reach of children.
4 Tilt each cartridge toward you as you lower it. Make sure the tabs rest on the hooks.
black | color | Don’t place the cartridge tabs |
under the hooks, or you may | ||
|
| damage the clamp when you |
|
| close it. |
hooks |
|
|
5 Lower the clamps so they snap shut.
6 Press the | ink replacement button and close the printer cover. You see the |
green | power light flash and you hear the printer make noise. |
| ink replacement |
| button |
Don’t turn off the printer or interrupt ink charging while the 
power light is flashing or you’ll use up more ink than necessary when you turn it back on.
7 Wait until ink charging is finished (the green 
power light stops flashing).
