DIP switch settings
Before you install the C82303* interface, you may need to adjust some of the settings. When making DIP switch setting changes, it is best to use a pointed device, such as a
Caution
All changes of DIP switch and jumper settings should be made with the printer power turned off. The printer checks and recognizes new settings only at the time the power is turned
About DIP switches
A set of DIP switches on the C82303* is labelled SW1. SW1 contains a number of individual toggle type switches that can be set either on or off. The individual switches are referred to by set (SW1) and number. Therefore, the switch in set SW1 marked by the small number 3 is called DIP switch
5