Spill-Proof Cuts Thermal Printer
Owner’s Manual
1.6 Testing the Printer
Run this test to check the printer. The test prints and cuts a resident test ticket. Verify
this ticket to ensure unit is printing and operating correctly.
To print the test ticket, power-on the printer while pressing and holding the Paper Feed
Button (figure 5) for approximately 3 seconds. A test ticket similar to the one below will
be printed approximately 5 seconds later. Press the paper feed button once more and
the ticket will feed. Pressing the button again will result in blank tickets.
Model: CALLISTO
Firmware: C51-2.41G-61UCS
COMMUNICATION
Interface: IEEE1284 (0) or Serial
Baud: 9600
Data Bits: 8
Parity: NONE
Handshaking: NONE
Print Mode: NTL
Aux Port: Disabled
PRINT CONTROL
Darkness Control: -1%
Voltage: 24.2 Volts
Temperature: 26 Celcius
Speed: 4 IPS
Black Bar Index: Disabled
SYSTEM RESOURCES
FLASH -Used: 0
-Free: 24576
LIBRARY INVENTORY
Templates: 0,1,2
Print Regions: 1,2,3,4,5,6,7,8,
h,9,A,B,C,D,E,F,G,
I,J,K,L,N,O,P,Q,R,
S,T,U,Z,X,a,b,c,d,
e,f,g,i,j,k,l,m,n,
o,p,q,
Graphics: None
Fonts: 0,3,5,7,8
MANUFACTURING INFORMATION
Printer ID: 5465789
Date Code: 20184
PWM Setting: 7F7F7F7FFFFFFF
A to D: DE7AA400FD000000
Resets: 9
Tickets: 00001336
Status: C51-2.41G-40-40-40-40-40-P
Figure 7: Test Ticket Example (may vary from actual printout depending on revision,
firmware chosen and printer settings)
103494
Aug. 2006
7