Epson® PowerLite® Cinema 200 Update

Your projector includes an additional picture quality setting not described in your User’s Guide. If you notice faint vertical bands in the picture, you can eliminate them by following these steps:

1.Turn on the projector and let it warm up for about 10 minutes.

2.Darken the room lights. You do not need to project an image from a video source to perform this adjustment.

3.Press the Menu button on the remote control.

4.Use the arrow buttons to highlight the Setting menu, press to select it, then open the

Operation menu and select LCD Panel Adjustment.

You see this screen, which lets you correct each of the three RGB (red, green, blue) color components:

5.Select Vertical Stripe Adjustment R. You see this screen:

Bands

Light part of the screen

6.Look at the screen to determine where the vertical bands are more visible—in the light or dark part of the screen. This is the part you should adjust first.

Note: The banding (if visible) appears within each bar or stripe on the screen.