Epson CX11N, CX11NF Transporting the CX11N, Related Documentation, Cleaning the ADF Pickup Rollers (CX11NF Only), For Long Distances, For Short Distances

Epson AcuLaser CX11N/CX11NF

Cleaning the ADF Pickup Rollers (CX11NF Only)

If the Auto Document Feeder fails to feed paper, open the ADF cover on the left side. Then close the cover and and wipe the rollers with a soft dry cloth to remove paper dust.

Pickup rollers

Transporting the CX11N

For Long Distances

If you need to transport your product for long distances, carefully repack it using the original box and packing materials.

1.Make sure the CX11N is turned on, then press the

Setup button.

The Setup light turns on and the LCD screen displays Setup Mode for a few seconds, then changes to the Setup menu screen.

2.Use the u or d button to select Scan Settings, the press the r button.

3.Use the u or d button to select Carriage Lock, then press the r button.

4.Set the transportation lock on the left side of the document table to the locked position.

5.Turn off the CX11N and remove the following items:

❏Any loaded paper

❏Paper cassette unit (if installed)

❏Photoconductor

❏USB cable

❏Power cord

6.Attach the protective materials onto the product, then repack the product in its original box.

Caution:

After transporting the product, set the transportation lock on the left side of the document table in the unlocked position before using the product.

For Short Distances

If you are moving the product on its own, two people should lift and carry the product.

1.Turn off the CX11N and remove the following items.

❏Any loaded paper

❏Paper cassette unit (if installed)

❏Photoconductor

❏USB cable

❏Power cord

2.Be sure to lift the product by the correct positions as shown below.

Warning:

The back side of the product is heavier than the front, so prepare for this difference as you lift. Two people should lift the product from the correct positions.

3. When moving the product, always keep it horizontal.