English
Windows System Requirements
To use your CX1500 and its software, your system should have:
■A Pentium®
■Microsoft® Windows® 98SE (factory installed), Windows Me, Windows 2000, or Windows XP (factory installed or upgraded from
■A minimum of 128MB of RAM (256MB recommended)
■A minimum of 500MB available hard disk space for installing the software
■
■
■Mouse or pointing device
■SVGA or higher resolution color monitor with 800 × 600 screen resolution (XGA monitor with 1024 × 768 resolution recommended)
Note:
Important Safety Instructions
Before using your CX1500, read and follow these safety instructions:
■Be sure to follow all warnings and instructions marked on the CX1500.
■Use only the type of power source indicated on the CX1500 label.
■Use only the power cord that comes with the CX1500. Use of another cord may cause fires or shock. Do not use the cord with any other equipment.
■Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as air control systems or other
■Place the CX1500 near a wall outlet where the plug can be easily unplugged.
■When connecting the CX1500 to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable.
■Do not let the power cord become damaged or frayed.
■If you use an extension cord with the CX1500, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
■Keep your CX1500 and computer system away from potential sources of electromagnetic interference, such as loudspeakers or cordless telephone base units.
■Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.
2