6Install Software

Your software works with Windows® 98SE, Me, 2000, and XP, and Macintosh® OS 9.1 to 9.2.2 and OS X 10.2.x and 10.3.x.

Windows

1 Make sure the CX4600 is NOT CONNECTED to your computer.

Note: If you see a screen like this, click Cancel and disconnect the USB cable. You can’t install your software that way.

2 Insert the CX4600 CD.

3 Click Install and follow the on-screen instructions. Software installation takes several minutes.

4 When prompted, connect the USB cable. Use any open USB port on your computer.

Note: If installation doesn’t continue after a moment, make sure you securely connected and turned on the CX4600.

5 When you’re done, remove the CD and restart your computer.

You’re ready to copy, print, and scan! See the Quick Reference book or your on-screen CX4600 Reference Guide.