Epson CX5800F 7Connect Phone Line, Any Problems, LINE, Paper out

7Connect Phone Line

If you are going to connect a dedicated phone line to the Epson Stylus CX5800F for faxing, connect it as shown below.

If you want to connect a telephone or answering machine, see the Basics Guide for instructions.

Connect the phone cable leading from your telephone wall jack to the LINE port on the back of the Epson Stylus CX5800F.

SB

LINE T.

Note: If you connected the Epson Stylus CX5800F to a DSL phone line, you must install a DSL filter to the line or you won’t be able to fax. Contact your DSL provider for the necessary filter.

Any Problems?

		Setup
	On
		Auto Answer
	Print Index	Send/Rec. Fax
100%	Print From Index	Fax Resolution
Fit to Page	Print All/DPOF	Fax Contrast
Copyy	Memory Card	Fax
1symb	2ABC	3DEF	Answer
			Mode
4GHI	5JKL	6MNO
7PQRS	8TUV	9WXYZ	Redial/
			Pause

0

Tone

On light

Display

Fax

Plain Paper

Photo Paper

Letter 5“x7” 4“x6”

Start

B&W

Start

Color OK

Start Color/OK button

Cancel/Back

If the green On light is flashing, just wait until it stops before pressing any control panel buttons.

If you see a Paper out message on the display, reload paper and press the OK button to continue.

If you see a No ink cartridge message on the display, an ink cartridge may be installed incorrectly. Press the OK button, then open the scanner and push down the cartridges and cartridge cover all the way. See section 4 on the front of this sheet for instructions.

If you see a Paper jam message on the display, press the OK button to eject the paper, then pull out the jammed sheets from the sheet feeder or output tray. See the Basics Guide for details.

See your Basics Guide and on-screen User’s Guide for more problem-solving information.