5 Install Software

Your software works with Windows® 98SE, Me, 2000, XP, XP Professional

x64 Edition, and Windows Vista,™ and Macintosh® OS X 10.2.8, 10.3.9 to 10.4.x.

Windows

1 Make sure the CX7000F Series is NOT CONNECTED to your computer.

Note: If you see a screen like this, click Cancel and disconnect the USB cable. You can’t install your software that way.

2 Insert the CX7000F Series CD.

With Windows 98SE, Me, 2000 or XP, go to step 4.

With Windows Vista, go to step 3.

3 With Windows Vista, if you see this screen, click Run EPSETUP.EXE.

Then click Continue at the User Account

Control screen.

4 Click Install and follow the on-screen instructions to install software

and print a test page. Software installation takes several minutes.

5 When prompted, connect the USB cable to the computer first. Then connect the cable to the printer.

Note: If installation doesn’t continue after a moment, make sure you securely connected and turned on the CX7000F Series.

6 When you’re done, remove the CD.

You’re ready to copy, print, and scan! See the Basics Guide or your on-screen User’s Guide.