Epson Stylus CX7800

Ink Cartridges

Colors

Cyan, magenta, yellow, black

Cartridge life

6 months at 77 °F (25 °C) after opening

 

the package

Temperature

 

Storage

–4 to 104 °F (–20 to 40 °C)

 

1 month at 104 °F (40 °C)

Freezing*

3.2 °F (–16 °C)

*Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C).

Caution:

To ensure good results, use genuine Epson cartridges and do not refill them. Other products may cause damage to the printer not covered by Epson’s warranty. Don’t use an ink cartridge if the date on the package has expired.

Film Holder

Unit

 

35 mm film

max. 6 frames to 1 set

Slide film

max. 4 frames to 1 set (color positive

 

film only)

Type

Color negative film

 

Color positive film (strip)

 

Color positive film (mount)

 

Monochrome negative film

Paper

Single sheets

 

Size

A4 (8.3 ⋅ 11.7 inches)

 

A5 (5.8 ⋅ 8.3 inches)

 

A6 (4.1 ⋅ 5.8 inches)

 

Letter (8.5 ⋅ 11 inches)

 

Legal (8.5 ⋅ 14 inches)

 

Half-letter (5.5 ⋅ 8.5 inches)

 

Executive (7.3 ⋅ 10.5 inches)

 

4 ⋅ 6 inches

 

5 ⋅ 7 inches

 

3.5 ⋅ 5 inches

 

8 ⋅ 10 inches

 

User Defined up to 8.5 ⋅ 44 inches

Paper type

Plain bond paper or special paper

 

distributed by Epson

Thickness

0.003 to 0.004 inch (0.08 to 0.11 mm)

Weight

17 lb (64 g/m²) to 24 lb (90 g/m²)

 

(for plain bond paper)

Envelopes

 

Size

No. 10 (4.1 ⋅ 9.5 inches)

 

DL (4.3 ⋅ 8.7 inches)

 

C6 (4.5 ⋅ 6.4 inches)

Paper type

Plain bond paper

Weight

20 lb (75 g/m²) to 24 lb (90 g/m²)

Note:

Poor quality paper may reduce the print quality and cause paper jams or other problems. If you have print quality problems, switch to a higher grade paper.

Do not load curled or folded paper.

Use paper only under these conditions:

Temperature: 59 to 77 °F (15 to 25 °C)

Humidity: 40 to 60% RH

Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.

Always load paper into the sheet feeder with the short edge first. Load envelopes flap edge left with the printable side up.

Printable Area

A

B-LB-R

CNormal

Borderless*Envelope

A The minimum top margin is 0.12” (3.0 mm).

B-L The minimum left margin is 0.12” (3.0 mm) for single sheets and 0.20” (5.0 mm) for envelopes.

B-R The minimum right margin is 0.12” (3.0 mm) for single sheets and 0.20” (5.0 mm) for envelopes.

CThe minimum bottom margin is 0.12” (3.0 mm).

DThe minimum bottom margin is 0.78” (20 mm) for envelopes

*When printing with the borderless feature, print quality may decline in the expanded area. Before printing large jobs with the borderless setting, print a single sheet to check print quality.

8/05

Epson Stylus CX7800 - 3