Placing Film and Slides

First, remove the document mat. Then follow the steps below:

Pull up the fastener, then pull out the document mat.

Placing Film

1Open the film strip cover and slide the strip of film into the film holder.

Insert the film under the tabs, with the shiny (base) side up. Close the film strip cover.

2Place the film holder on the glass as shown.

Insert the tabs in the two holes to the left of the glass.

3Close the document cover.

You’re ready to start a photo project. See one of these sections for instructions:

❍“Making Photos From Slides and Negatives” on page 8

❍“Restoring Faded Color Photos, Slides, and Negatives” on page 9

5