4 Install ink cartridges

Note: Don’t load paper before installing the ink cartridges.

1

2

Lift up the scanner.

Open the cartridge cover.

3 Shake the ink cartridges, then unpack them.

4 Remove only the yellow tape from each cartridge.

Caution: Don’t remove any other seals from the cartridges.

5 Insert the cartridges in the holder for each color.

6 Press the cartridges down until they click.

7 Close the ink cartridge cover and press it down until it clicks.

8 Close the scanner.

9 Press the OK button to charge ink. Charging takes about 2 minutes.

Caution: Don’t turn off the CX9400Fax Series while the On light is flashing or you’ll waste ink.