Sub-menu Function
Standby Mode You can use the following functions even when the projector is in standby mode if this is set to Communication On.
•Monitor and control the status of the projector over the network.
•The microphone input function outputs audio from the projector's speaker when a microphone is connected to the Microphone (Mic)
input port.
You can use SNMP
g
or the application software "EasyMP Monitor" supplied with this product to monitor and control the status of the
projector over the network.
The microphone input is also enabled if this setting is set to Communication On and Standby Microphone is set to On.
Standby Microphone (Only available when the Standby Mode mentioned above is set to Communication On)
When Standby Mode is set to Communication On, set whether microphone input is enabled (On) or disabled (Off).
*2
USB Type B Set this to USB Display when the projector and a computer are connected with a USB cable and computer images are projected.
s Quick Start Guide
Set this to Wireless Mouse when the mouse pointer is to be operated by the remote control. s p.48
Set this to Off when using only Easy Interactive Function (EB-460i/450Wi only). s p.54
Language You can set the Language to use for displaying messages and menus.
Reset You can return the adjustment values for Display
*1
and Operation
*3
in the Extended menu to their default settings.
To return all menu items to their default settings, see s p.91
*1When User's Logo Protect in Password Protect is set to On, settings related to User's Logo cannot be changed. You can make changes after setting User's Logo Protect to
Off. s p.50
*2When Power On Protect in Password Protect is set to On, microphone input is not possible even when Standby Microphone is set to On.
*3 Except for "High Altitude Mode".
List of Functions
79