Replacing Consumables 69
AAfter you turn off the projector's power and the
confirmation buzzer beeps twice, disconnect the
power cable.
BWait until the lamp has cooled down, then remove
the lamp cover.
Loosen the lamp cover fixing screw with the screwdriver supplied
with the new lamp or a + head screwdriver. Then slide the lamp
cover straight forward and lift it to remove.
CLoosen the two lamp fixing screws.
DTake out the old lamp.
If the lamp is cracked, replace it with a new lamp, or contact your
local dealer for further advice. sEpson Projector Contact List
Procedure