If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.
If the indicators do not show clearly what the problem might be, refer to "When the Indicators Provide No Help".
s p.62
Reading the Indicators
The projector is provided with the following three indicators that indicate the operating status of the projector.
AIndicates the operating status. Standby condition
When the [t] button is pressed in this condition, projection starts.
Preparing monitoring via USB communication or cool down in progress
All buttons are disabled while the indicator is flashing.
Warming up
Warm-up time is about 30 seconds. After warm-up is complete, the indicator stops flashing.
The [t] button is disabled during warm-up.
Projecting
BIndicates the internal temperature status.
CIndicates the projection lamp status.
Refer to the following table to see what the indicators mean and how to remedy problems that they indicate.
If all indicators are off, check that the power cable is connected correctly and that the power is being supplied normally.
Problem Solving59