13

Installing the Projector

Preparing the Remote Control

Inserting batteries into the remote control

Using the remote control

If delays in the responsiveness of the remote control occur or if it does not operateafter it has been used for some time, it probably means that the batteries arebecoming flat. If this happen, replace the batteries with two new batteries. Use twonew AA-size alkali batteries or manganese batteries as replacement batteries. Batteries other than AA-size alkali batteries or manganese batteries cannot be used.
At the time of purchase, the batteries are not
inserted into the remote control. Insert the supplied
batteries before using the remote control.
Insert the batteries in the correct direction.
Close the cover.
Check the (+) and (-) indications inside
the battery compartment and insert the
batteries so that they face correctly.
Lift up the battery cover while pressing its
tab.
TIP
Approx.30
Approx.30
Approx.30
Approx.10m
Operating distance
Approx.30
Approx.30
Operating range (horizontal)
Operating range (vertical)
Approx.10m
Operating distance
Approx.60
Approx.10 *
Approx.30
Approx.10m
Operating distance
Approx.10m
Operating distance
* Remote control signals
cannot be received within this
range.