Adjusting the Lighting

For presenting printed material or 3-D objects, the two lamps will provide ample light. If the ambient lighting in the room is sufficient, however, you may obtain a better image with the lamps off. Press the Lamp button on the control panel to turn off the lamps. Press it again to turn the lamps back on.

Lamp button

Adjusting the Image

Once you see your image, you may need to make certain adjustments:

■To zoom or focus your image, see the next section.

■To freeze the image on screen, see page 16.

Zooming and Focusing Your Image

When you turn on the document camera, the Auto Focus feature is turned on and the indicator light is lit.

Use the Tele button on the control panel to enlarge the image, and use the Wide button to reduce it. The document camera will automatically focus the image. Once the zoom or focus is set for a flat document, you probably won’t have to adjust it again for subsequent documents.

Wide button Tele button

Using the Document Camera 15