Epson EMP-503 , Connecting to a Desktop Macintosh

Connecting to a Computer
■ ■ ■ ■ ■
■
13
Connecting to a Desktop Macintosh
To connect the projector to your desktop Macintosh, you
need to:
•Connect the computer cable
•Connect the mouse cable (if you want to use the remote
control as a mouse)
•Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and
computer if they are on.
♦ Note: Macintosh configurations vary. See your computer
manual for the location of the ports needed to connect your
projector.
Connecting the Computer Cable
First connect the computer cable. Refer to this illustration as
you follow the steps below.
Macintosh desktop
adapter
Computer port
computer cable