Installation
■ ■ ■ ■
8
Connecting to a PC desktop computer
Before beginning, make sure that the projector and computer
are both turned off.
1. Connect the computer cable.
♦
Note:
Computer configurations vary. See your computer
manual for the location of the ports needed to connect your EMP
-7300/7200/5300 projector.
a. Connect either end of the computer cable to the
projector’s Computer 1 port. The Computer 2 port is
used when connecting a second computer.
b. Disconnect the monitor cable from the computer and
connect it to the other end of the computer cable.
Monitor cable
Computer cable