Installation
■ ■ ■ ■
10
a. Connect the small end of the main cable to the
projector’s Mouse/Com 1 port. The Mouse/Com 2
port is used when you are connecting a second
computer.
b. Connect the PS/2 mouse cable (9-pin) to the mouse
terminal on the large end of the main cable.
c. Disconnect the computer’s mouse cable from the
mouse port on the back of your computer and connect
the mouse connector (6-pin) of the PS/2 mouse
cable to the mouse port.
d. If your system uses a serial mouse, use the serial mouse
cable instead of the PS/2 mouse cable.
e. If you are planning to use the projector software,
connect either end of a PC serial cable to the PC serial
terminal on the large end of the main cable.
♦
Note:
You will not be able to use the projector software if your
system does not have two serial ports.
f. Connect the other end of the PC serial cable to the
serial port on the back of your computer.
g. Tighten all connector screws to ensure secure
connections.