Epson EMP-745 Unpacking the Projector, Documentation, batteries, USB cable, AAA alkali, Power cable, Audio adapter, Computer cable, EasyMP Software, Document CD-ROM

Unpacking the Projector

When you unpack the projector, make sure that you have all these components. If any of the components are missing or incorrect, please contact the supplier.

Projector	Remote control	AAA alkali
(With lens cover attached)		batteries
		(2 pcs.)
		Insert into the remote
		control.

Wireless LAN card

(IEEE 802.11g/b compatible)

Insert into the card slot of the projector when connecting to a computer via a wireless LAN.

Power cable

(1.8 m (6 ft.))

Use to connect the projector to an electrical outlet.

Computer cable

(mini D-Sub 15-pin/ mini D-Sub 15-pin, 1.8 m (6 ft.))

Use when projecting computer images.

Audio adapter

(3.5 mm dia. Stereo mini plug/ RCA pin jack × 2 red/white, 20 cm (7.9 inches))

Connect this adapter with a commercially-available RCA audio cable to output sound of video equipment from the projector's built-in speaker.

USB cable

(1.8 m (6 ft.))

Use when connecting to a computer with a USB port to use the wireless mouse function or to send data to the projector.

EasyMP Software		Password Protect sticker

(CD-ROM 1 pc.)		When Password Protect is enabled,
Use to install the EasyMP		attach this to somewhere on the
software into a computer.		projector where it is clearly visible to
		increase anti-theft effectiveness.

Soft carrying case

(with shoulder strap and handle) For carrying the projector.

Documentation

Read This First (this booklet)	Document CD-ROM
Safety Instructions/	Quick Reference Guide
World-Wide Warranty Terms	EasyMP Network Setup Guide