8
Part Names and Functions
RearBase•[SCART] input port p.12
Connects to the component
(YCbCr or YPbPr) out port or D
out port of the video equipment.
•[Trigger out] port
When the projector power
is turned on, a 12 V DC
signal is output from this port.
When the projector's power is
turned off or a problem with
operation occurs, the output
becomes 0 V to send the
projector's power ON/OFF
status to an external device.
•[Video] input port p.12
Connects to general video out
ports of the video equipment.
•[HDMI ] input port p.12
Connects to video equipment or a
computer that is HDMI-
compatible.
•[S-Video] input port p.12
Connects to the S-Video out ports of
the video equipment.
•[RS-232C] port
Connects the projector to a computer
using an RS-232C cable. This port is
for control use and should not be used
by the customer.
•Power inlet p.14
Connects the power cable.
•Main power switch
p.14
•Security lock
p.54
•Remote control
light-receiving
area p.13
Receives signals
from the remote
control.
•[PC] input port p.12
Connects to the RGB out
port of the computer.
•[Component] input port p.12
Connects to the component (YCbCr or YPbPr ) out port of the
video equipment.
•Suspension bracket fixing points (4 points) p.48
Install the optional ceiling mount here when suspending the projector from a ceiling.
•Air filter (air intake vent)
p.44, 46
Prevents dust and other foreign particles
from being drawn into the projector.
It should be cleaned periodically.
•Lamp cover p.46
Open this cover when replacing the lamp
inside.