Press on the projector's control panel or the on the
remote control twice to turn off the power.
To prevent mis-operation, a confirmation message appears when or is pressed once.
The power turns off when you press the button once more. You can also press or twice
in quick succession to turn off the power.
The Power indicator will flash orange (cool-down in progress/about 45 seconds).
If you press a button other than
on the projector's control panel or
on the remote control while the
confirmation message is displayed, the
message will disappear and the
projector will return to its original
condition.
"Turning Off the Projector"
in User's Guide
Tip
Turn off the power for the equipment connected to the projector.
After the Power indicator lights orange steadily
you can disconnect the power cable.
If the power cable is disconnected while the Power indicator is still flashing orange,
it may cause problems with projector operation.
Adjustment /
Turning Off the Projector
Turning Off the Projector
Power indicator
Press the on the remote control to display the configuration menu on the screen. You can then adjust
the individual brightness, contrast and sharpness settings.

Other adjustments

Adjustment
Press on the remote
control.
Use and to select the
menu item to be set, and then
press .
To change the setting for
another item, repeat steps
and .
To close the menu, press .
Use and to select an
item, and then use and
to adjust the setting or select
"ON" or "OFF". Press to
accept the setting.
Main menu Sub-menu (Video)
Remote control
Press to return to the previous
menu level.
Tip The configuration menu appears.
The selected sub-menu then appears.
"Using the Configuration
Menu Functions"
in User's Guide