When the Indicators Provide No Help - 75
The image is unclear
·The screen is
blurred.
·Focus can only be
attained in certain
areas.
●Has the focus been set correctly?
see page39
●Has the projection angle been increased by adjusting the feet?
There are cases where the vertical focus is difficult to align if the
projection angle is too large.
●Is the projection distance suitable?
The recommended projection distance range is between 1.1m and
14.6m (3.6ft. and 48.1ft.). Locate the projector within this distance
range.
see page16
●Is the lens soiled?
see page81
●Is the projection light shining at right angles onto the screen?
see page17
●Is the lens fogged?
Condensation will form on the surface of the lens when the projector
is suddenly brought into a warm room from a cold room, and this
may lead to the image seeming blurred. In this event, switch the
power off and leave the unit to stand for a while.
●Has the [Sync., Tracking and Position] been adjusted?
The image can be adjusted by regulating the [Tracking] and [Sync]
buttons on the projector while monitoring the image on screen.
Adjustments can also be made by opening the [Menu].
see page40, 57
●Has the signal format setting for the image been set correctly?
·In the case of computer images:
Set the signal format with [Menu] − [Video] − [Resolution]. There are
cases where the image signals being input cannot be determined in
the [Auto] mode.
see page57
·In the case of video images:
Select the video signal format with [Menu] − [Video] − [Video Signal].
There are cases where the video image signals being input cannot be
determined in the [Auto] mode.
see page58