76 - When the Indicators Provide No Help
·The image is
disturbed.
·Noise appears
●Has the cable been connected correctly?
see page18, 28
●Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer’s instruction manual for details on how to amend the
signals.
see page18
●Has the [Sync*., Tracking and Position] been adjusted?
The image can be adjusted by regulating the [Tracking] and [Sync]
buttons on the projector while monitoring the image on screen.
Adjustments can also be made by opening the [Menu].
see page40, 57
●Has the cable length been extended?
There are cases where noise will occur if the cable length is extended.
●Has the signal format setting for the image been set correctly?
·In the case of computer images:
Set the signal format with [Menu] − [Video] − [Resolution]. There are
cases where the image signals being input cannot be determined in
the [Auto] mode.
see page57
·In the case of video images:
Select the video signal format with [Menu] − [Video] − [Video Signal].
There are cases where the video image signals being input cannot be
determined in the [Auto] mode.
see page58