4
Registering projectors for monitoringThis operation is carried out when starting EMP Monitor for the first time after
it has been installed and when you would like to add projectors. Once a
projector has been registered, the status for the projector will be displayed
automatically each time EMP Monitor is started from that point onwards.
PROCEDURE
Click [Start] - [Programs] (or [All Programs]) - [EPSON
Projector] - [EMP Monitor] in that order to start EMP
Monitor.
Click [Register projector].
The [Register projector] dialogue box will be displayed.
Use the "Registration using automatic detection" ( p.5) or
"Registration using IP address (Manual registration)" ( p.6)
procedure to register projectors.
1
2
Click to add a projector to be monitored