Epson ESC/VP21 manual Appendix, USB Connection TS10,TW200,TW500,TW200H

ESC/VP21 Communication Manual Home

5.Appendix

A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the projector..

Serial Connection (TW100,TS10,TW10,TW200,TW500,TW10H,TW200H,TW20,TW600/520/550/800,TW700,TW1000,TW2000)

•Select RS-232C at Advanced Setting of the Menu.

•Communication condition

Baud rate	: 9600 bps
Data length	: 8 bits
Parity	: No
Stop bit	: 1 bit
Flow control	: No
• Connector	: D-sub 9pin
• Projector input	: Control(RS-232C)
		<Computer>
	<Projector>

<Projector>		(PC serial cable)			<Computer>
GND	5			5		GND
RD	2			3		TD
TD	3			2		RD
	Signal name		Function
	GND		Common ground
	TD		Transmitted data
	RD		Received data

*Theres no effect if DTR and DSR are not used.

USB Connection (TS10,TW200,TW500,TW200H)

•TS10, select USB at Advanced Setting of the Menu.

•Epson USB VCOM Driver has to be installed in your computer to use USB fpr communication.A COM port is added to your computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT)

in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).

• Connector	: USB(B type)
		<Computer>
	<Projector>

7 of 8