16electrolux

appliance is correct, the door does not catch on the sides of the cabinet. If the door does

not close correctly, loosen or tighten the ad- justable feet until the appliance is level.

Water connection

Water inlet hose

Connected the appliance to a hot (max. 60°) or cold water supply.

If the hot water comes from alternative sour- ces of energy that are more environmentally friendly (e.g. solar or photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption.

Connect the inlet hose to a water tap with an external thread of 3/4”.

Caution! Do not use connection hoses from an old appliance.

The water pressure must be in the limits (refer to 'Technical data'). Make sure that the local water authority gives you the average mains pressure in your area.

Make sure that there are no kinks in the water inlet hose and that the water inlet hose is not squashed or entangled.

Fit the locknut correctly to prevent water leaks.

Make sure that the drain hose is not bent or squashed to prevent that the water drains does not drain correctly.

Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance.

A drain hose extension must not be longer than 2 m. The internal diameter must not be smaller than the diameter of the hose.

If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot

Caution! Do not connect the appliance to new pipes or pipes that are not used for a long time. Let the water run for some minutes, then connect the inlet hose.

Water drain hose

1.Connect the water drain hose to the sink spigot and attach it under the work sur- face. This prevents that the waste water from the sink goes back into the appli- ance.

2.Connect the water drain hose to a stand pipe with vent-hole (minimum internal di- ameter 4 cm).

The appliance has a security feature to prevent that dirty water goes back into the appliance. If, the spigot of the sink has a 'non-return valve', this valve can cause the appliance to drain incorrectly. Remove the non-return valve.

Caution! Make sure that the water couplings are tight to prevent water leakage.

max 85 cm

max 400 cm

min 40 cm

Page 16
Image 16
Epson ESL63010 user manual Water inlet hose, Water drain hose