Epson EX6210 Quick Setup

4124976 Rev.0

1-F C

4124976 Rev.0

1-F M

4124976 Rev.0

1-F Y

4124976 Rev.0

1-F KQuick Setup

Before using the projector, make sure you read the safety instructions in the

online User’s Guide.

Connect the projector

Choose from the following connections. See the sections below or the online

User's Guide for details.

Computer

USB port

Connect the square end of the USB cable to the projector’s USB

TypeB (square) port. Connect the flat end of the cable to any USB port on

your computer.

Windows® XP or later: After turning on the projector, follow the

on-screen instructions to install the Epson USB Display software

(EMP_UDSE.EXE; only on first connection). If the software screen does not

display automatically, do one of the following:

• Windows 8: Click EPSON_PJ_UD in the upper right-corner, then select

Run EMP_UDSe.exe.

• Other Windows versions: open My Computer or Computer, then

double-click EPSON_PJ_UD.

Mac OS X 10.5.8 or higher: After turning on the projector, the setup folder

for USB Display appears in the Finder. Double-click USB Display Installer and

follow the on-screen instructions to install the Epson USB Display software

(only on first connection).

Note: If you have problems installing the USB Display software, make sure the

USB Type B setting in the projector’s Extended menu is set to USB Display.

See the online User’s Guide for instructions.

Monitor port

Connect one end of a VGA cable to the projector’s Computer port, and the

other end to your computer’s monitor port. If you are using a laptop,

switch it to external display (see “Troubleshooting”). You can also connect an

audio cable.

HDMI port

Connect one end of an HDMI cable to the projector’s HDMI port and the other

end to an HDMI port on your computer.

Video device

Connect up to 4 video devices and use the remote control to switch between

them.

RCA video cable (composite video)

Component video to VGA cable

S-Video cable

Audio cable

HDMI cable

Camera, USB device, or Epson DC-06 document camera

Connect a digital camera, USB flash drive, USB storage device, or Epson

document camera DC-06 to the projector’s USB TypeA (flat) port.

If you connect a digital camera, USB flash drive, or USB storage device, you can

use the projector’s Slideshow feature. See the User’s Guide for details.

Turn on your equipment

1 Turn on your computer or video source.

2 Plug in the projector.

The power light on the

projector turns orange.

3 Open the A/V mute slide all the way.

4 Press the power button on the

projector or remote control. The projector

beeps, the power light flashes green,

and then stays on.

Note: To shut down the projector,

press the power button twice, then

unplug it. You don’t have to wait for the

projector to cool down.

5 The default language of the menu system is English. To select another

language, press the Menu button on the remote control. Select

Extended and press Enter. Select Language and press Enter. Select

your language and press Enter. Press the Menu button to exit the

menu system.

Adjust the image

1 If you don’t see an image, press the Source Search button on the

projector or remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see the

troubleshooting tips on the right.

2 To raise the image, press the

foot release button and lift

the front of the projector.

Release the button to lock the

foot in position.

3 To reduce or enlarge the image, turn the zoom ring.

4 Turn the focus ring to sharpen the image.

5 If your image looks like or , you’ve placed the projector off to

one side of the screen at an angle.

Use the horizontal slider on the projector to correct it. Or place the

projector directly in front of the center of the screen, facing the screen

squarely.

6 Your projector automatically adjusts images that look like or ,

but if necessary you can press the or button on the projector to

correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which

source to display

Turn projector

on and off

Access projector

menus

Turn off projector

display Get solutions to

common problems

Navigate projector

menus

For more information on using the remote control, see the online

User’s Guide.

Troubleshooting

If you see a blank screen or the No signal message after turning on your

computer or video device, check the following:

•

Make sure the power light on the projector is green and not flashing,

and the A/V mute slide is open.

•

Press the Source Search button on the projector or the remote

control to switch to the correct image source, if necessary.

•

If you’re using a Windows laptop, press the function key on your

keyboard that lets you display on an external monitor. It may be

labeled CRT/LCD or have an icon such as . You may have to hold

down the Fn key while pressing it (such as Fn + F7). Wait a moment

for the display to appear.

•

If you’re using a Mac laptop, open System Preferences and select

Displays. Select the VGA Display or Color LCD option if necessary,

then click the Arrange or Arrangement tab, and select the Mirror

Displays check box.

Where to get help

Manual

For more information about using the projector, click the icon on your desktop

to access the online User’s Guide (requires an Internet connection). If you don’t

have a User’s Guide icon, you can install it from the projector CD or go to the

Epson website, as described below.

Telephone support services

To use the Epson® PrivateLine® Support service, call (800) 637-7661. This

service is available for the duration of your warranty period. You may also

speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or

(905) 709-3839 (Canada).

Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM

to 4 PM, Pacific Time, Saturday

Days and hours of support are subject to change without notice. Toll or long

distance charges may apply.

Internet

Visit www.epson.com/support (US) or www.epson.ca/support (Canada)

for solutions to common problems. You can download utilities and

documentation, get FAQs and troubleshooting advice, or e-mail Epson.

Registration

offers. You can use the CD included with your projector, or register online at

www.epson.com/webreg.

EX6210

EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson

Corporation. PrivateLineis a registered trademark of Epson America, Inc.PrivateLine is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of

their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX CPD-39169

412497600

*412497600*

USB cable

HDMI cable

VGA cable