Connecting with an HDMI cable (EX70 only)

For the best image and sound quality, connect your video equipment to the HDMI port, if possible.

1 Connect an HDMI cable (not included) to the HDMI port on your video player and the HDMI port on the projector.

2 Start your video or presentation. Use the Source Search button on the projector or the Search or Source Search button on the remote control to select the HDMI source, if necessary.

Connecting with a component video cable

If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a

component-to-VGA cable (not included) to connect the projector. Or, with the EX30 and EX50, you can use a component video cable (not included) along with the included component-to-VGA adapter.

Once you’ve connected the cable(s), start your video or presentation. Use the Source Search button on the projector or the Search or Source Search button on the remote control to select the video source, if necessary.

You can connect an optional audio cable if you want to play sound through the projector. See the User’s Guide on your CD-ROM for instructions.

6 Adjust the image

1 To raise the image, press the foot release lever and lift the front of the projector. Release the lever to lock the foot in the position you want.

2 Rotate the focus ring to sharpen the image. To reduce or enlarge the image, rotate the zoom ring (EX50/EX70 only) or press the Wide (enlarge) or Tele (reduce) button on the projector’s control panel (EX30 only).

Zoom ring

Focus ring

 

(EX50/EX70 only)

 

3 If your image looks like or , first make sure the projector is facing the screen squarely. Then, if necessary, press the and buttons on the projector’s control panel until the image looks correct.