4 Set up the remote control

1

2

3

Remove the battery cover.

Insert the batteries.

Replace the battery cover.

EX30/EX50

EX70

5 Connect your video source

Follow these instructions to connect the projector to your computer using the USB cable (Windows® only), or to your video equipment using an HDMI cable (EX70 only) or component video cable. For instructions on using other connection options, see the User’s Guide on your CD-ROM.

Connecting with a USB cable

If you’re connecting a Windows Vista®, XP, or 2000 computer to the projector, you can use the USB cable. You don’t need to use the VGA cable.

1 Make sure the projector is turned on.

2 Turn on your computer.

3 Connect the square end of the USB cable to the projector’s TypeB USB port.

4 Connect the flat end of the cable to any available USB port on your computer.

5 Follow the instructions on your computer screen to install the Epson USB Display software (you need to install the software only the first time you connect). After the software has been installed, you see your computer’s screen displayed by the projector.

NOTE If you see a “Digital Signature Warning” while installing the software, select Continue.

You can connect an optional audio cable if you want to play sound through the projector. See the User’s Guide on your CD-ROM for instructions.

Turn over