Solutions When No Image Appears
Solutions When Image is Incorrect Using the USB Display Function
Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
Solutions When Only a Partial Image Appears
Solutions When the Image is Not Rectangular
Solutions When the Image Contains Noise or Static
Solutions When the Image is Fuzzy or Blurry
Solutions When the Image Brightness or Colors are Incorrect
Solutions When There is No Sound or Low Volume
Parent topic: Solving Problems
Solutions When No Image Appears
If no image appears, try the following solutions:
Press the A/V Mute button on the remote control to see if the image was temporarily turned off.
Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
Press the projector's power button to wake it from standby or sleep mode. Also see if your connected
computer is in sleep mode or displaying a blank screen saver.
Check the settings on the Signal menu to make sure they are correct for the current video source.
Adjust the Brightness setting or select the Normal Power Consumption setting.
Check the Display setting to make sure Messages is set to On.
If the projector does not respond when you press the control panel buttons, the buttons may be
locked. Unlock the buttons.
If the projector does not respond when you press buttons on the remote control, make sure the remote
receivers are turned on.
For images projected with Windows Media Center, reduce the screen size from full screen mode.
For images projected from applications using Windows DirectX, turn off DirectX functions.
Parent topic: Solving Image or Sound Problems
Related references
Projector Setup Settings - Extended Menu
Image Quality Settings - Image Menu
106