Loading Continuous Paper With the Front Push Tractor
To load continuous paper in the front push tractor, follow these steps.
1 |
| 2 |
|
|
|
1
2
Turn off the printer, then remove the front cover.
Open both sprocket covers, and fit the first four holes of the paper, printable side up, over the tractor pins. Then close the sprocket covers.
Note:
Load continuous paper that has a clean, straight edge to avoid paper jams.
Make sure the left and right sprockets are positioned properly for your paper’s width.
If you load continuous paper of a different size or thickness, adjust the position of the sprockets or change the paper thickness lever setting. See Chapter 3 of the User’s Guide for instructions.
2