Installing the Manuals

1.Insert the projector CD in your computer’s CD or DVD drive. (Double-click the Epson installer icon, if necessary.)

2.Select your language, follow the instructions on the screen to register, then click User’s Guide,

EMP Monitor Operation Guide (Windows) or User’s Guide (Macintosh) to install the manuals. (If you are using Windows and you don’t have Adobe® Reader®, click Adobe Reader to install it also.) Then click Exit.

3.To view the manuals, double-click the PowerLite G5000 User’s Guide or EMP Monitor Operation Guide (for Windows users only) icon on your computer’s desktop.

Turning the Projector On

1.Turn on your computer or image source.

2.Remove the lens cover.

3.Press the power button. After the power light stays green, the projector is ready.

Note: If the Direct Power On function is enabled, you can turn the projector on

without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide.

4.If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.”

Switching Between Image Sources

Press the Source Search button on the projector

Press the Search button or one of the Source buttons on the remote control

Note: The BNC, EasyMP, and HDMI buttons are not applicable to this projector.

Adjusting Image Position

If the projector is mounted to the ceiling, use the vertical lens shift dial to move your image up or down or use the horizontal lens shift dial to move your image left or right. You can also use the ceiling mount to adjust the position.

Horizontal lens shift dial Vertical lens shift dial

If the projector is on a table, place it so it faces the screen as squarely as possible. To raise the image, use the vertical lens shift dial as shown above, or press the blue foot release lever and lift the front of the projector to extend the front adjustable foot. Release the lever to lock the foot in position.