Epson GT-12000 - page 26

Power-on sequence
Follow these instructions each time you turn your comp uter
and SCSI devices on.
If you have an internal hard disk, turn on the scanner and any
other SCSI devices you plan to use. Wait a few seconds; then
turn on the computer.
If you have an external hard disk, turn on the scanner, external
hard disk (which should be first on the daisy chain), and any
other SCSI devices you plan to use. Wait a few seconds; then
turn on the computer.
SCSI devices in the middle of the daisy chain may be left off if
you don’t use them.
Installing the Scanner Software
Now that you have connected the scanner to your compute r,
the next thing to do is install your scanner software. Follow the
instructions in the EPSON TWAIN Pro User’s Guide. Then read
Chapter 2, “Scanner Basics,” before your first scan.
Besides the scanner software, your GT-12000 scanner also
comes with the PageManager software which gives you extra
control over scanning and scanned images, especially when
using the Auto Document Feeder. See page 3-21 for installation
instructions.
LGinger Rev.C
A5 size Chapter 1
97/07/23 Pass 1, DR
1-12 Setting Up the Scanner