Non-recommended Commands
Epson recommends against using the following commands because some of these commands are not supported in existing printers and some are duplicates of other commands.
BEL Beeper
BS Backspace
DC1 Select printer
DC3 Deselect printer
CAN Cancel data
ESC # Cancel MSB control
ESC< Unidirectional printing for one line
ESC = Set MSB to O
ESC > Set MSB to l
ESC? Reassign
ESC A Select
ESC K Select
ESC L Select
ESC Y Select &dot,
ESC2 Select
DEL Delete character
Installation/Support Tips
Most application programs let you specify the type of printer you use so that the program can take full advantage of the printer’s features. Many of these programs provide an installation or setup section that presents a list of
Choosing from a menu
Because Epson printers share a great many commands, you can use an application program even if it does not list your printer on its printer selection menu. Choose from the following list (the printers are listed in the order of preference):
LQ450
If none of these printers is listed, select the first one available from the following list:
EX, FX, LX, RX, MS, Epson printer, Standard printer, Draft printer
To use all the features of your printer, however, it is best to choose a program with your printer on its menu. If your program does not list this printer, contact the manufacturer of the software to see if an update is available.
Information Reference List
Engineering Change Notices
None.
Product Support Bulletins
None.
Technical Information Bulletins
None.
Related Documentation
and | ||
| ActionPrinter | 5000/55OU Service Manual |
and AP5000/5500 Parts List | ||
User’sGuide |
8/20/91 |
|