LQ-570/1070

Electrical

Rated voltage:AC 120 V (120 V model)

Input voltage range: AC lcr3.5 to 132 V (120 V model)

Rated cuwen t:

2.0 A (120 V model)

Power cunsrrnption: (during self-test printing in draft mode, at 10 cpi) Approx. 33 W (120 V model)

Ratedfrequency range: 50 to 60 Hz

Inputfrequency range: 49.5 to 60.5 Hz

Insulation resistance: 10 MR minimum (at DC 500 V between AC power line and chassis)

Dielectric strength (between AC line and chassis):

120 V model:

AC 1.0 kV (rms), 1 minute or AC 1.2 kV (rms), 1 second

lRbd5: Size

Thickness

Envelopes:

Size

Thickness

Weight

Printable area:

63.5x 23.8 mm (2% x 15/16 inches) 101 x 23.8 mm (4 x 15/16 inches)

101 x 27 mm (4 x 17/16 inches)

0.07to 0.09 mm (O.OM8 to 0.0031 inches) for backing sheet

0.16to 0.19 mm (O.OCKi3 to 0.0075 inches) total • Use continuous type labels only.

• Use labels only under normal temperature and humidity conditions.

No. 6-166 x 92 mm (6.5 x 3.6 inches) No. 10-240 x 104 mm (9.5 x 4.1 inches)

0.16to 0.52 mm (0.0063 to 0.0197 inches) 45 to 91 g/m2 (12 to 15 lb)

• Use envelopes only under normal temperature and humidity conditions.

• insert envelopes into the top slot only.

Environmental

Temperature:Operation: 5” to 35°C (41” to 95°F) Storage: -30” to 60°C (-22’ to 140OF)

Humidity:Operation: 10% to 80% RH without condensation

Storage: 5% to 85% RH without condensation

Paper

Single sheets

The minimum top margin is 8.5 mm (0.33 inches).

The minimum left and right margins are 3 mm (0.12 inches). However, the maximum printable width is 203 mm (8 inches)

A

Printable area

Single sheets: Width

top

front

Length

Thickness

weight

148 to 257 mm (5.8 to 10.1 inches) for LQ570 148 to 420 mm (5.8 to 16.5 inches) for LQ-1070 182 to 257 mm (7.2 to 10.1 inches) for LQ570 182 to 364 mm (7.2 to 14.3 inches) for LQ1070 364 mm (14.3 inches) maximum

0.065 to 0.14 mm (0.0025 to 0.0055 inches)

52.3 to 90 g/m2 (14 to 24 lb)

for LQ-570 or 345 mm (13.6 inches) for LQ1070.

The minimum bottom margin is 13.5 mm (0.53 inches).

Continuous puper

Sing&sheet multi-part forms:

Width

182 to 216 mm (7.2 to 8.5 inches) for LQ-570

 

182 to 364 mm (7.2 to 14.3 inches) for LQ-1070

Length

257 mm to 297 mm (10.1 to 11.7 inches)

copies

Four sheets (1 original plus up to 3 copies)

Thickness

0.12 to 0.32 mm (0.0047 to 0.012 inches)

Weight

40 to 58 g/m* (12 to 15 lb) per sheet

 

• Load single-sheet multi-part forms only

 

into the front slot.

 

• Use orily carbonless multi-part forms.

Continuous paper:

 

Width

101 to 254 mm (4 to 10 inches) for LQ-570

 

101 to 406 mm (4 to 16 inches) for LQ1070

Copies

Four sheets (1 original plus up to 3 copies)

Thickness

0.065 to 0.10 mm (0.0025 to O.OU.39 inches) for

 

one sheet

Weight

0.065 to 0.32 mm (0.0025 to 0.012 inches) total

52.3 to 82 g/m* (14 to 22 lb) for one sheet

 

40 to 58 g/m* (12 to 15 lb) per sheet in multi-

 

part forms

 

• Use only carbonless multi-part forms.

The xninimum top and bottom margins (above and below the perforation) are 9 mm (0.35 inches).

The minimum left and right margins are 13 mm (0.51 inches). However, the maximum printable width is 203 mm (8 inches) for LQ570 or 345 mm

(13.6 inches) for LQ1070

Envelopes

A The minimum top margin is 8.5 mm (0.33 inches).

B The minimum left and right margins

are 3 mm (0.12 inches).

CT h e minimum bottom margin is 13.5 mm (0.53 inches).

Printable area

LQ-570/1070-2

8/20/91

24-Pin Printers