EPSON
front and
Width | Front |
| 3.5 to 12 inches (90 to 304.8 mm) |
| |
| 3.9 to 11.7 inches (100 to 297 mm) |
Length | Front, top glue |
| 2.8 to 16.5 inches (70 to 420 mm) |
| Front, side glue |
| 2.8 to 11.7 inches (70 to 297 mm) |
| High capacity |
| 2.8 to 16.5 inches (70 to 420 mm) |
Copies | 1 original + up to 5 copies |
Thickness | 0.0047 to 0.018 inch (0.12 to 0.46 mm) |
Weight | 10 to 15 lb (40 to 58 g/m2) |
Binding | Front |
| Line glue at the top or side of form |
| |
| Line glue at the top of form |
Envelopes:
front and
Size | No. 6 | 6.5 × 3.6 inches (165 | × 92 mm) |
| No. 10 | 9.5 × 4.1 inches (241 | × 105 mm) |
Thickness | 0.0063 to 0.0205 inch (0.16 to 0.52 mm) | ||
Weight | 12 to 24 lb (45 to 90 g/m2) |
| |
Postcards:
front and
Width | 3.9 to 7.8 inches (100 to 200 mm) |
Length | 3.9 to 7.8 inches (100 to 200 mm) |
Thickness | 0.0087 inch (0.22 mm) |
Weight | 51 lb (192 g/m2) |
Roll paper:
rear entry with optional roll paper holder
Width | 8.5 ± 0.12 inches (216 ± 3 mm) |
Thickness | 0.0028 to 0.0035 inch (0.07 to 0.09 mm) |
Weight | 14 to 22 lb (52 to 82 g/m²) |
Continuous paper (standard and multipart): rear entry
Width | 4 to 12 inches (101.6 to 304.8 mm) |
Length | 3 to 22 inches (76.2 to 558.8 mm) |
Copies | 1 original + up to 5 copies |
Thickness | Printable area |
|
| 0.0025 to 0.018 inch (0.065 to 0.46 mm) | |
| Perforated edges | |
| up to 0.035 inch (0.9 mm) | |
Weight (not multipart) | 14 to 34 lb (52 to 128 g/m2) | |
Weight (1 multipart sheet) | 10 to 15 lb (40 to 58 g/m2) | |
Binding | Point glue and/or paper staples on both sides | |
❏The ratio of the cut/uncut length at the perforation should be between 3:1 and 5:1.
❏The thickness of the perforation part when extended should be 2 mm or less.
❏The perforation between pages should not extend all the way to the edges of the paper. Uncut length on the edges should be 1 mm or more.
❏When the horizontal and vertical perforation cuts intersect, do not print in between .12 inch (3 mm) above and below the horizontal perforation and in between 1.1 inch (28 mm) left and right of the vertical perforation.
Continuous paper with overlapping multipart forms: rear entry
Width and length of the backing sheet
| Same as standard continuous paper |
Copies | 1 original + up to 5 copies |
Thickness | Printable area |
| 0.0025 to 0.018 inch (0.065 to 0.46 mm) |
| Overlapping area |
| up to 0.028 inch (0.70 mm) |
Labels: rear entry | |
Label size | 15/16 × 2.5 inches (23.8 × 63.5 mm) minimum |
| 0.1 inch (2.5 mm) corner radius, minimum |
Backing sheet width
4 to 12 inches (101.6 to 304.8 mm)
Backing sheet length (one page)
3 to 22 inches (76.2 to 558.8 mm)
Backing sheet thickness
0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Total thickness
0.0063 to 0.0075 inch (0.16 to 0.19 mm)
Label weight 17 lb (64 g/m²)
4 - EPSON | 11/00 |