Epson CBB, M4X11 WARNING

This printer must be lubricated only O-11 when you need a lubrication for carriage guide shaft. If you

lubricatewith another oil,it could permanently damagethe printhead unit..

Although this printer requires no specific maintenance on a regular basis, recommends that you clean the

followingthorough ly wheneveryou get achance.:

❏Outer case

Use asoft, clean cloth, dampened with milddetergent, ifnecessary.

❏Auto sheet feeder

If the inside of the auto sheet feeder is dirty (dusty), carefully brush away all dust and dirt using a soft

brush. Ifthe pickuproller of thesheet feeder is dirty,clean its surfacewith asoft, clean clo th.

❏Inside theprinter

If you notice any dust or dirt that has accumulated inside the printer when you open the outer case for

repair,remo vealldust and dirtusing a smallvacuu m cleanerdesigned for such purposes.

❏Use only O-11 oil when lubricationg the carriage guide shaft. If you lubricate with another oil,

it could permanently damage the print head unit.

❏Never use paint thinner, trichloroethyylene, or ketone-based solvents for cleaning. These

chemicals can damage the components the printer.

❏Do not use a hard or abrasive brush for cleaning.

❏Be careful not to damage the components of the printer when using a vacuum cleaner.

❏If ink gets into your eyes, flush them immediately with clean water and ask for medical attention.

❏Disconnect the printer from the power source when you clean inside the printer.

❏Once removed ink cartridge must be replaced to the brand-new cartridge when the printer is

sent back to the user.(Regfer to the following ink cartridge code)

●Black: 1023206 , Color: 1029341

❏When the printer is sent back to the user or during the transport, the cartridge should remain to

be installed in the main unit. Since protective material is required to protect carriage during the

transport, it should be ready for avilability.

❏It is encouraged to use the adjustment program to adjust the head angle and location when the

print head is replaced.

If print quality deteriorates, clean the printhead using the built-in printhead cleaning function. The printer also

has an automatic printhead cleaning cycle to ensure proper nozzle operation for ink ejection and to preserve

theprinthe adin the best condition.Performing thecleaning moreoften wastes ink.

1. Turn the printer on and press the Cleaning button. The Power light flashes during this cycle and then

stays on whenit is finished.

2. Turn off the printer.

WARNING

CAUTION

Rev. A 6-1