CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM

CHAPTER 6 CONNECTING WITH THE TARGET SYSTEM

The Adapter Board (S5U1C8F360Z1) can be used as an evaluation board by connecting it with the user target board.

(1)To operate the microcomputer on the Adapter Board, the user must provide the peripheral circuits. Refer to "Basic External Wiring Diagram" in the "S1C8F360 Technical Manual" for the required circuits.

(2)Use the supplied I/O cables (80-pin/40-pin ⋅ 2 flat type and 60-pin/30-pin ⋅ 2 flat type) for connect- ing between the S1C8F360 Adapter Board (S5U1C8F360Z1) and the target system.

(3)Be sure to turn the power off before connecting the target system because the I/O cable includes a power line (VDD).

I/O cables

CN1-1 (40 pins)

CN1-2 (40 pins)

CN2-1 (40 pins)

mark

CN2-2

(40 pins)

CN1

CN3-1 To target board

(30 pins)

CN2

 

CN3-2

CN3

(30 pins)

Fig. 6.1 Connecting with the target system

S5U1C8F360Z1 MANUAL

EPSON

7

(ADAPTER BOARD FOR S1C8F360/8F361)