28
FCC Compliance Statement

Ink Cartridge Safety Instructions

■
Keep ink cartridges out of the reach of children.
■
Be careful when you handle used ink cartridges; there may be ink remaining around the ink
supply port. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes,
flush them immediately with water. If ink gets in your mouth, spit it out and see a doctor right
away.
■
Do not shake ink cartridges after opening their packages; this can cause leakage.
■
Do not put your hand inside the product or touch any cartridges during printing.
■
Install a new ink cartridge immediately after removing a used one. Leaving cartridges
uninstalled can dry out the print head and may prevent the product from printing.
■
Do not touch the green IC chip on the side of the cartridge. This may prevent normal
operation.
■
If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the product. Note that there is a valve in the ink supply
port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining
items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding
area.
■
Use an ink cartridge before the date printed on its package.
■
Do not dismantle an ink cartridge. This could damage the print head.
■
Store ink cartridges in a cool, dark place.
■
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room
temperature for at least three hours before using it.
■
Store ink cartridges with their labels facing upward. Do not store cartridges upside down.
FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause interference to
radio and television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.