6 Install software

Your software works with Windows® 2000, XP, XP Professional x64 Edition, Windows Vista® and Mac OS® X 10.3.9, 10.4.x, and 10.5.x.

Windows

1 Make sure the NX400 Series is NOT CONNECTED to your computer.

Note: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable.

2 Insert the NX400 Series CD.

With Windows Vista, if you see the AutoPlay window, click Run Epsetup.exe. When you see the User Account Control screen, click Continue.

3 Click Install and follow the on-screen instructions.

4 When prompted, connect the USB cable. Use any open port on your computer.

Note: If installation doesn’t continue after a moment, make sure you securely connected and turned on the NX400 Series.

5 Follow the on-screen instructions to install the rest of the software and register your NX400 Series.

6 When you’re done, remove the CD.

You’re ready to copy, print, and scan! See the Quick Guide or your on-screen User’s Guide for instructions.