|
| PSB No: | |
|
| Page: 3 of 11 | |
|
| ||
ERROR | 33 | Thermistor error | |
ERROR | 40 | Parity / Framing error | |
FONT CARD ERROR | Font cartridge is bad (or is not inserted) correctly | ||
INSERTION ERROR | Paper is not inserted correctly or has jammed at the paper | ||
|
| tray | |
PAPER EMPTY | No paper in the paper cassette | ||
|
| Paper cassette is not installed properly | |
|
| Paper cassette lid is open | |
|
| Paper sensor is bad | |
PAPER JAM | Paper is jammed inside the printer | ||
PAPER SIZE ERROR | Paper setting does not match the size of the paper in the | ||
|
| paper cassette | |
PS CHANGE | Paper size requested by the host conflicts with the | ||
|
| SelecType setting | |
|
|
|
|
|
|
|
|
NOTE:
In some cases, the red CONTINUE light flashes when an error is detected. This requires you to correct the problem and then press the CONTINUE button to dear the error. However, if the AUTO CONT option in SelecType is set to ON, some errors may clear automatically even though the problem remains.
Status messages are preceded by [S], warning messages are preceded by [W], and error messages are preceded by [E]. In some cases the message you see on your display also shows the printer mode.
[E] ADD MEMORY FOR
The printer has insufficient memory available in the channel displayed.
[E] CARD MEMORY OVERFLOW
This message indicates that the combined memory requirement of the cards in slots A and B exceeds 4 Mbytes.