If you use an extension cord with this product, make sure the total amperage of all devices plugged into the extension cord does not exceed the cord’s amperage rating.

Never disassemble, modify, or attempt to repair the AC adapter by yourself.

Do not use power outlets controlled by wall switches or automatic timers.

Do not use power outlets on the same circuit as large motors or other appliances that may cause voltage fluctuations.

Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.

Position this product’s power cord so that it will not be stepped on or run over.

Do not place any objects on the power cord and the AC adapter.

Keep the power cord straight at the ends and at the points where it enters the transformer.

The power cord should be placed to avoid abrasions, cuts, fraying, crimping, kinking, and other damage.

If you cannot insert the plug into the power outlet, contact an electrician.

Remove the AC plug from the outlet during lightning storms.

For US and Canadian users: Use the included power cord or a 6 to 10 foot UL-approved type SPT-2 or heavier type, 2 x 18 AWG cord with a 125 V 10 A plug and 125 V 7 A connector.

Using a Memory Card

Only memory cards designed for the product’s specifications can be used. (See page 17.)

The methods for using memory cards vary according to card type. See the documentation included with your memory card for details.

Do not remove a memory card or turn off the product while the Access light is flashing.

57