Checking your installation
To verify that your USB software installed properly, check the Device Manager. Click Start, point to Settings, and click Control Panel. Then click System and click the Device Manager tab.
You should see the device EPSON USB Conversion Cable Devices listed. Click the + next to the device; you should see EPSON USB Conversion Cable (EPXUSB1:) listed too.
Note:
If you’ve installed more than one USB printer device, each new installation will increase the last digit of the USB conversion cable device name by a factor of one. For example, a second installed USB printer device would be listed as EPSON USB Conversion Cable (EPXUSB2:), and a third installation would be listed as USB Conversion Cable (EPXUSB3).
If the printer doesn’t work correctly, uninstall the printer software as described in your printer documentation. Also uninstall the EPSON USB printer device software the same way. Then reinstall the USB device and printer software as described in this guide. If you’ve installed printer driver software for the EPSON Stylus COLOR 600, remember to set up your system to use Windows Print Manager. (See “Setting Up Your System to Print to the EPSON Stylus COLOR 600” on the next page.)
If you still have problems, contact your EPSON dealer or EPSON technical support as described in your printer documentation.
26