PictureMate Deluxe Viewer Edition

Electrical

 

 

When charging

 

Normal operation

optional battery

 

 

 

Input voltage range

108 to 132 V

 

 

 

 

Rated frequency range

50 to 60 Hz,

 

 

 

 

Input frequency range

49.5 to 60.5 Hz

 

 

 

 

Rated current

0.4 A

0.7 A

 

 

 

Power consumption (approximate)

 

 

 

 

Printing

13.0 W

30 W

 

 

 

Sleep mode

5.0 W

27 W

 

 

 

Powered off

0.7 W

26 W

 

 

 

Environmental

Temperature

 

Operation

50 to 95 °F (10 to 35 °C)

Storage*

4 to 140 °F (20 to 60 °C)

 

1 month at 104 °F (40 °C)

Transit*

–4 to 140 °F (–20 to 60 °C)

 

120 hours at 140 °F (60 °C)

Humidity (without condensation)

Operation

20 to 80% RH

Storage*

5 to 85% RH

* Stored in shipping container

Safety Approvals

Safety standards

UL 60950-1, CSA No. 60950-1

EMC

FCC part 15 subpart B class B

 

CSA C108.8 Class B

Photo Cartridge

Colors

Black, Cyan, Magenta, Yellow, Red, and Blue

 

 

Cartridge life

6 months after opening package, at

 

77 °F (25 °C)

 

 

Storage temperature

4 to 104 °F (20 to 40 °C)

 

1 month at 104 °F (40 °C)

 

 

Transit temperature

22 to 140 °F (30 to 60 °C)

 

120 hours at 140 °F (60 °C)

 

 

Freezing temperature*

12.2 °F (11 °C)

 

 

Dimensions

7.7 3.6 0.7 inches (W D H)

 

196 91.5 18.8 mm (W D H)

 

 

*Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C).

Caution: To ensure good results, use a genuine PictureMate Photo Cartridge and do not refill it. PictureMate calculates the amount of ink remaining using an IC chip on the photo cartridge, so even if the cartridge is refilled, the IC chip will report that it is empty.

Do not use a photo cartridge if the date on the cartridge has expired.

Do not expose PictureMate or a PictureMate Photo Cartridge to heat or direct sunlight.

Loading Paper

Follow these steps to load PictureMate Photo Paper.

Caution: Don’t load plain paper; this could damage PictureMate.

1.Move the handle to the back and down, then tilt up the photo viewer screen.

2.Open the paper support and gently slide up the top part until it clicks into place. Then open the output tray.

3. Place your paper against the right edge, glossy side up.

Edge guide

4.Slide the edge guide against the paper. Make sure it is snug, but not so tight that the paper is bent.

2 - PictureMate Deluxe Viewer Edition

4/05