PictureMate Deluxe Viewer Edition
Warning: Keep ink cartridges out of the reach of children and do not drink the ink.
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with water. If discomfort or vision problems continue after flushing, see a doctor immediately.
6. Close the cartridge door. Make sure it snaps shut.
Inserting the New Photo Cartridge
1.Shake the cartridge four or five times while it is still wrapped in its packaging.
7. Lower the handle.
2. Unwrap the cartridge.
Caution: Don’t touch the green circuit board. Install the photo cartridge immediately after you remove it from its package. If you leave a cartridge unpacked for a long time before using it, normal printing may not be possible.
3.Make sure the lever is moved to the left before you insert the cartridge, then carefully slide the cartridge, label side up, into the slot.
Lever
4.Push in both sides of the cartridge evenly to make sure it is not crooked. It won’t go in all the way.
5.Move the lever to the Lock position by sliding it in the direction shown.
Cleaning the Print Head
If your print quality is not as good as it used to be, if your photos are too light, or if they are missing colors or have lines running through them, PictureMate’s print head nozzles may be clogged.
Follow these steps to clean the print head:
1.Press the Menu button.
2.Press 
or 
to highlight Maintenance.
3.Press 
to open the Maintenance menu.
4.Make sure Clean Print Head is selected, then press 
. You see this message:
5.Press OK to begin cleaning the print head.
The cleaning process takes about 40 seconds. PictureMate makes some noise, and you see the following message on the screen:
Caution: Never turn off PictureMate while it is cleaning its print head, unless it hasn’t moved or made noise for more than
5 minutes.
8 - PictureMate Deluxe Viewer Edition | 4/05 |