2
3
4
5
6
7
Slide the cartridge lever left to the Release position.
Remove the initial photo cartridge from its package.
Caution: Do not install a different PictureMate Pal
cartridge for initial setup.
Install only the initial photo cartridge that came with PictureMate Pal.
Slide the cartridge straight into the slot, label side up, until it clicks into place. It will not go in all the way.
Slide the lever all the way right, to the Lock position.
Caution: If the cartridge is not inserted correctly, ink may leak.
Close the cartridge door.
Initial Charge
Charging.
Please wait.
PictureMate Pal charges the print head for
3 to 4 minutes and displays the screen above.
When you see the Charging complete message on the photo viewer screen, press OK.
Press OK