43
Printing is too slow.
●It takes a few moments for PictureMate to process
your images before printing them.
●If PictureMate is in a hot or sunny location, move it
to a cooler place and try printing again.
For faster printing, try these tips:
●Don’t print more than 40 pictures at a time.
●Photos with borders print faster than borderless
photos.
●Turn off special features such as color effects and
red-eye reduction.
Software Installation Problems●Follow the instructions beginning on page 23 to
install your software. Don’t connect PictureMate to
your computer until you are instructed to.
●Close other programs, including screen savers and
virus protection software, and try installing again.
●Make sure your system meets the requirements
listed in your online User’s Guide.
●To print over a network, see the online User’s
Guide for instructions on setting up printing.
Print Quality ProblemsYou see banding (light lines) in your prints.
●The print head may need cleaning. See page 37.
●Be sure to print with the glossy or whiter side of
the paper face up.
●The Print Pack may need replacing. See page29.
●The print head may need aligning. See page 39.
Your print is grainy.
The print head may need aligning. See page 39.
Your print is blurry or smeared.
●Use PictureMate photo paper to ensure proper
saturation, absorption of ink, and quality.
●Be sure to print with the glossy or whiter side of
the paper face up.
●The print head may need cleaning. See page 37.
●The print head may need aligning. See page 39.