Function Description and Usage

The function list on the left side of the ELP Link II main dialog box shows the functions available for assignment to an Effects button. To assign the functions, see page 67.

The table below describes these functions and how to use them.

Note: To use the Effects buttons, the ELP Link II software must be running and the computer connected to the projector.

Function

Description and usage

 

 

Line

Draws a straight line on the screen.

 

Press the Effects key assigned to this effect. Then press the bottom

 

multi-purpose button once to define the line start position. Move the

 

cursor using the remote Pointer button. Then press the bottom

 

multi-purpose button twice to define the line end position.

Ellipse

Draws an ellipse (oval) on the screen.

 

Press the Effects key assigned to this effect. Then press the bottom

 

multi-purpose button once to define the position of one end of the

 

ellipse. Move the cursor using the remote Pointer button. Then press

 

the bottom multi-purpose button twice to define the position of the

 

other end of the ellipse.

Square

Draws a square on the screen.

 

Press the Effects key assigned to this effect. Then press the bottom

 

multi-purpose button once to define the position of one corner of the

 

square. Move the cursor using the remote Pointer button. Then press

 

the bottom multi-purpose button twice to define the position of the

 

other corner of the square.

 

 

■ ■ ■ ■ ■ ■ ■

Using the Software

65